OpenWrt on Tenda W307R
I have successfully installed OpenWrt Attitude Adjustment 12.09 on Tenda W307R Rev. V2.0. This HW is not described on OpenWrt HW list, but I have flashed it successfully with openwrt-ramips-rt305x-w306r-v20-squashfs-factory.bin.
BusyBox v1.19.4 (2013-03-15 02:26:13 UTC) built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
ATTITUDE ADJUSTMENT (12.09, r36088)
-----------------------------------------------------
* 1/4 oz Vodka Pour all ingredients into mixing
* 1/4 oz Gin tin with ice, strain into glass.
* 1/4 oz Amaretto
* 1/4 oz Triple sec
* 1/4 oz Peach schnapps
* 1/4 oz Sour mix
* 1 splash Cranberry juice
-----------------------------------------------------
root@OpenWrt:~# cat /proc/cpuinfo
system type : Ralink RT3052 id:1 rev:3
machine : Tenda W306R V2.0
processor : 0
cpu model : MIPS 24KEc V4.12
BogoMIPS : 212.58
wait instruction : yes
microsecond timers : yes
tlb_entries : 32
extra interrupt vector : yes
hardware watchpoint : yes, count: 4, address/irw mask: [0x0000, 0x0388, 0x0e30, 0x0208]
ASEs implemented : mips16 dsp
shadow register sets : 1
kscratch registers : 0
core : 0
VCED exceptions : not available
VCEI exceptions : not available
Comments:
Hi, As I can remember, holding the reset sets the box to default along with the ip to 192.168.1.1/24. David
#### [Hank]( "juqe56@yahoo.com") -
I flashed my w307r with the bin you suggested and all worked fine. I accidentally set the static IP to 192.168.1.2 and the netmask to 255.255.255.255 and I am now unable to access router. How do I reset to defaults. I tried 30/30/30. I tried holding the reset for 7 seconds(per stock firmware instructions). Any suggestions would be appreciated. Thanx.